Product Categories
Contact Us

Serve Real Instruments Co.,Ltd

Tel: +86-021-61480182

Fax: +86-021-61480184

Phone: +86-18621861107

Email: info@servereal-instruments.com

Contact person: Patrick. Chuang

ADD: 1th Floor, Building 2, Lane 180 Zhangheng Rd.,Pudong District, Shanghai, P.R.China.

UL Standard Muffle Furnace 1700°C

UL Standard Muffle Furnace 1700°C

The muffle furnace is kind of a box type electric heating oven for high temperature applications, it can be used for chemical analysis, physical testing, small steel parts heat treatment, either in workshop or laboratory.

Products Specifications:

 

The muffle furnace is kind of a box type electric heating oven for high temperature applications, it can be used for chemical analysis, physical testing, small steel parts heat treatment, either in workshop or laboratory. 

Our MLS series muffle furnace integrates high quality Silicon molybdenum rod (MoSi2),imported high quality hearth, UL Certificated electronic board (optional), UL certificate transformer (optional), professional software (optional), to reach higher quality, easier operation, longer tooling life.


Features


1. High quality Silicon molybdenum heating rods

1.1 Silicon molybdenum heating rods(MoSi2) heat end diameter D1 is 7mm, not easy to bend, lower load with stick surface, longer tooling life.

1.2  Heat bend technology, uniform electric resistance, longer tooling life

1.3 Lu cool end length is 210mm (normally use 180mm), longer cool end length enable lower furnace top temperature.

1.4 Silicon molybdenum rod surface oxide film amorphous dense, better protection of silicon molybdenum rods.


2. 

2.1 Vacuum suction-forming high quality high purity alumina polycrystalline fiber curing hearth

2.2 Japanese forming technology

2.3  Electronic resistance wire gap and pitch are laid as per the most advanced Thermal Technology, thermal field has been simulated by thermal software.

2.4 All sides heating, more even thermal field.

2.5  No powder fall of the hearth, good heat insulation, high reflectivity, even thermal filed, good anti heat up shrinkage ability. 


3. UL certificated electronic board and transformer

4. Soft start current-limited trigger

5. Air switch and leakage protector equipped

6. Professional computer application software enable parameters setting, real time data and curve indication, data management



Technical specifications


Model

MLS-1703

MLS-1705

MLS-1707

MLS-1709

MLS-17013

Power

3 KW

5 KW

7KW

9 KW

13KW

Hearth dimension(DXWXH)

160X150X150mm

200X200X200mm

300X200X200mm

300X250X250mm

400X300X300mm

Furnace overall dimension

510X490X850

560X530X900

560X630X900

610X630X980

660X730X1340

Working power supply

220V

220V

220V

380V

380V

Phase number

Single phase

Heating elements

1800 Silicon molybdenum heating rods

 Control mode

 Programmable temperature controller

1. 30 section temperature   control program PID adjustment.

2. With over-temperature   protection, thermal couple broken protection, power supply automatically cut   off when over temperature or thermal couple broken happened (when furnace   temperature over 1720 degree C or the thermal couple broken, AC relay will   automatically cut off, main circuit cut off, ON light off, OFF light on).

3. RS485 communication port   (buy with software)

4. When restart the furnace   after power off, program will continue run from the broken off temperature.

5. Thermal controller   features automatic calibration.

             

SHIMADEN FP93 temperature controller(optional)   Eurotherm   meter(Optiona   touch screen controller

 Temperaturerise rate

≤30 ℃/ Min

 Recommended temperature rise rate

15℃/ Min

 Hearth material

1800 type Polycrystalline alumina fiber (alumina content of 95% or more)   Japan made furnace

 Control accuracy

+/- 1C

 Max temperature

1700C

 Rated temperature

1650C

Surrounding surface temperature

≤45C

 Thermal ouple model

                                                                    B

Trigger  

Phase shift trigger (with soft start and current limit function)

Current limiting function: no matter how to adjust the heating time, our   secondary current after the transformer is limited to less than 160A, lno   matter how you operate, will not burn the equipment.

Soft-start function: the current will slowly increase when boot, less   impact to the heating elements, conducive to the heating elements

Electric parts

ZhengTai

SCR

106/16E SIMENS

Travel switch

The furnace door is equipped with a travel switch, open the oven door,   the power will automatically cut off to prevent the danger of electric shock.  

Certification

CE, UL, TUV


Key components

Silicon molybdenum MoSi2 heating element for muffle furnace.jpg

1. Silicon molybdenum heating rods(MoSi2)


2. Imported type Hearth



3. Eurotherm temperature meter(optional)


4. Soft start current limit trigger


5. Japan made temperature controller(optional)


6. UL certificated electronic board(optional)

7. UL certificated transformer (optional)


muffle furnace softwre.jpg

8. Computer software(optional)




Hot Tags: UL Standard Muffle Furnace 1700°C, manufacturers, suppliers, factory, price, buy, for sale